The reason for eyeglass scratch repair
Some people need to rely on prescription eyeglasses for day long on a regular basis. Regardless of the lens material, eyeglass lenses may get scratched during daily usage. The good news is that both glass lenses and plastic lenses can be repaired when there is a scratch.
Tools necessary for removing scratches from eyeglasses
Eyeglass scratch repair can be done at home, so that sometimes it is called home remedy for scratches eyeglasses. Some tools are needed, like a soft, lint-free cloth and tap water. Solutions for scratch removal can be furniture polish and petroleum jelly etc.
Step 1: Wash and Dry the glasses
Wash complete the scratched lenses in tap water comprehensively. And then dry them with a soft cloth. This is a necessary preparation before applying eyeglass scratch remover. In some cases, it is also feasible to use soap and hot water, so as to remove any dirt or residue on the lenses. This helps clean the lenses thoroughly and facilitate scratch removal. Some people like to wrap the frame in order to prevent it from getting wet.
Step 2: Apply eyeglass scratch remover to the lenses
As mentioned before, furniture polish can be used to remove lens scratches effectively. In this step, just spray some furniture polish on the scratched lens or lenses. It is also possible to use a wood-cleaning spray as an alternative. Another home remedy is to take use of a small amount of petroleum jelly. This solution will help in coating the lens scratches and fill in the crevices. As a result, each scratch will become less noticeable.
Step 3: Rub an eyeglass cloth against each scratch
After applying furniture polish or petroleum jelly onto each scratch, it is also necessary to rub the lenses with a professional cloth mildly in a circular motion. For each time, five seconds are enough.
Step 4: Have a checkup
After rubbing each scratch, it is important to check whether all scratches have been removed. If there is still a scratch, repeat the first three steps until all scratches become invisible.
Step 5: Clean and dry the glasses
Finally, it is a necessity to clean the glasses in depth because the lenses have been applied to the certain solution or scratch remover. This is similar to the first step.
Other solutions that can be taken as eyeglass scratch remover
a. Armour-Etch: This is a professional solution that can be used to deal with coated lenses. It is only necessary to spray this solution to the scratched side of the lens which has an anti-glare coating. This remover is helpful since only the coating layer is scratched, rather than the lens itself.
b. Non-abrasive toothpaste: Some eye care practitioners recommend plain non-abrasive toothpaste for eyeglass scratch repair.
c. Jeweler's rouge: Eyewear users can also get a small dab of jeweler's rouge from a jewelry store to repair scratched lenses.
d. Ammonia: It is also feasible to spray a small amount of ammonia as a scratch solution.
Cleaning eyeglasses is an inevitable work for all eyewear users. Even if they are encouraged to keep the glasses in a case when not in use, the eyewear will be polluted by dust and other particles when it stays on the face. This tiny task is to some degree complex and requires careful treatment. Some incorrect practices should be avoided. Cleaning eyeglasses on a daily basis is the indispensable way to keep the lenses and vision clear.
What should be removed from eyeglasses?
Eyeglasses may be polluted by dirt, oil, smudge, fingerprint etc. It is necessary to remove all these sources on a daily basis. Doing it every day is the only way to avoid long-term buildup.
Correct method for cleaning eyeglasses
Step 1: Wash the glasses using warm water
In this process, most dirt particles and oil on the surface of the lenses can be removed. After working in a dusty environment outdoors, these particles are easy to build upon the lenses. Rinsing the glasses in this way helps in minimizing abrasion and scratches.
Step 2: Dunk eyeglasses with soap
After the first step, some oil or greasy deposits may still stay on the lenses. It is always necessary to use dish soap or mild hand soap to make further lens cleaning. Dunk the glasses in a container filled with warm water and suds from a mild dish soap or mild hand soap. It is encouraged to swish the eyeglasses around in the container.
Step 3: Rinse the eyeglasses with tap water
In this step, running tap water will help wash off the soap liquid. It is important to rotate the glasses so as to get both sides of the lenses washed. Ensure that no washing up liquid remains.
Step 4: Dry it with damp cloth
It is worth emphasizing that the cloth should be folded and touch both sides of the lens at once. Use the thumb, index and middle finger to move the cloth from left to right in slow motion. It is necessary to apply mild force onto the lens.
Step 5: Check up whether there are stubborn spots or bits of washing-up liquid
After drying up the glasses completely, the final step is to make sure that no stubborn spots or bits of washing liquid have been left up. Then the glasses can be put back onto the face or into the case.
a. Never use a dry cloth to rub hard the lenses. Some people incorrectly use the tail of a shirt to clean eyeglasses. Abrasive fibers contained in clothing fabrics will scratch the lenses.
b. Facial tissue should also be avoided when trying to dry the lenses, because the wood fibers can damage the lenses.
c. Avoid hot water when the frame is made of plastic.
d. Do not use unknown chemical solutions for rinsing or dunking the glasses. Homemade soap water or professional cleaning solutions for eyeglasses are recommended.
The lifespan of glasses not only depends on the materials quality, but also your maintenance. Generally speaking, a pair of glasses has a lifespan of 2 years. We suggest a new pair of glasses to those who have worn over two years. Daily wearing will decrease the light transmittance of lenses and abrade coatings. Besides, your vision comfort will be affected by the deformation of frames.
Following our tips to take care of your glasses.
1. Put on and put off your glasses with both hands to avoid them be out of shape by unbalanced force.
2.Put your glasses in box with lens upwards to avoid any scratch, when you do not use them.
3.Wipe your glasses with wet or dry cleaning cloth carefully and gently. Improper force will damage the coating of the lens.
4.Rimless glasses and semi-rimless glasses are more fragile than full frame glasses. So please be more careful. The screws of rimless glasses are prone to get loose. Please use our screwdriver to tighten them up after a period of using. For semi-rimless glasses, the nylon strings are fragile and the lenses are prone to drop out. So do not push the lens hardly.
5.If your glasses get in touch with water or sweat, please clean and dry up the glasses with the cloth. It's very crucial for metal frames or nose pads to avoid corrosion.
6.Don't wear your glasses on the top of your head. That may deform the frame. Also, there's a possibility of them falling off and getting damaged by wearing like that.
7.Don't put your glasses at a high temperature such as the front panel of your car. Especially in the summer, eyeglasses left in the car will get exposed to direct sunlight. Excessive heat can damage eyeglass lenses and lens coatings as well as cause plastic frames discoloration and deformation.